EA Double extremum forex robot


A medium-time period adviser whose work relies on guring out two extremes fashioned by indicators and evaluating them with worth extremes.

Choices EA Double extremum:

Start_lot – the preliminary lot measurement, from which its worth will develop. When the dynamic lot is o (threat = 0) Start_Lot is xed.

threat – allow a dynamic lot with a given threat stage. MaxOrders_InOneSet – the utmost variety of orders in a single set. 0 – no management. It provides you the pliability to restrict the whole variety of orders, whereas permitting you to open orders (at the least one after the other) to all units.

MaxOrders_InSymbol – The utmost variety of orders for the present image (the sum of all units). 0 – no management. PartialCloseIfPro t_ATRs – Partial shut perform. Closing worthwhile orders if greater than 3 are open in a single route throughout the identical set and the worth has gone to a distance> PartialCloseIfPro t_ATRs.

These settings are su cient for buying and selling.

Advisor Optimization EA Double extremum:

If you wish to enhance buying and selling, you may create your individual settings by optimizing for a particular pair and write them to a daily textual content le:

“MetaTrader … \ tester \ recordsdata \ DoubleExt.txt” – for testing, then copy to “MetaTrader … \ MQL4 \ Recordsdata \ DoubleExt.txt” – for buying and selling.

The adviser searches for the desired le with settings, and if it doesn’t discover it, it takes the bottom ones from the code.

The next parameters assist you to con gure the adviser.

OptimizationMode – allow / disable optimization mode. When OptimizationMode is enabled, the

ForPeriod, Indicator, Ind_per, i3, i4, SL_ATRs, TPSL_koef, BreakEven_ATRs, TrailDist_ATRs, CoefExpr parameters are optimized. The most e ective check outcomes are positioned within the speci ed textual content le (by the use of copy-paste), and from there, when OptimizationMode is turned o , the adviser takes parameters when buying and selling.

ForPeriod – chart interval (timeframe) for optimization.

Set_number – default is 0 (all units). Used to investigate a particular set, one of many recorded in a le.

Indicator – an analyzed indicator for guring out extremes: AO, RSI, CCI, Stochastic, MACD, RVI, WPR, Momentum. Ind_per – interval of the analyzed indicator (not related for AO).

i3 is a technique for guring out a double reducing vertex. It may possibly take a worth from 0 to 3 (see the determine under).

i4 is a technique for guring out a double rising peak. It may possibly take a worth from 0 to 3 (see the determine under).

SL_ATRs – stage of the preliminary cease loss, expressed within the variety of candles

(averaged). Hereinafter, the scale of the common candlestick is set by the ATR indicator (200) for the examined timeframe.

TPSL_coef – take revenue ratio to cease loss. Advisable from 1 to 10. BreakEven_ATRs – breakeven stage in ATRs. Advisable from 1 to 10 TrailDist_ATRs – trailing distance in ATRs . Advisable from 1 to 10.

If BreakEven is larger than TrailDist, trailing won’t begin till the worth goes past BreakEven stage. That’s, BreakEven will maintain again trailing.

If BreakEven is lower than TrailDist, then when the worth reaches the BreakEven stage, the order might be transferred to breakeven, and this stage will stay unchanged till the worth goes past the TrailDist stage, solely then trailing will start.

Coef_expr – the severity of the double extremum – the ratio of the smallest most to the minimal, which begins the o set of the determine. The smaller the coe cient, the extra pronounced the determine, and the much less typically it will likely be discovered. Advisable optimization vary:

0.55 to 0.95. The default is 0.95.

ShowPro tInfo – present / conceal details about the present buying and selling outcomes of the adviser.

After optimization and evaluation, choose probably the most acceptable check outcomes and, copying them, paste right into a textual content le. At rst of every line within the le (these would be the units that every work in line with their very own parameters), insert the title of the foreign money pair on which a particular consequence was obtained (for instance, “eurusd”), and press TAB (required). After optimization is full, save the le.



Here you can download the file to improve your investment strategy. we provide the best indicator or EA to invest, always try in demo for a period before using it in a real account.

Download file:


This content is locked

Login To Unlock The Content!


You may also like...